Sunburst Roll Out Awning Framesets

Aussie Traveller Sunburst Framesets

There are four main types of Aussie Traveller Framesets one designed to suit your requirements. A full description of the frameset can be found below.

Poptop Frameset
Customised to suit the short wall mounting height of pop top vans but long enough to maintain maximum projection of the awning fabric. The unique top bracket supplied,  raises the roller in line with the lowered pop top and relieves stress on the awning fabric when the pop top roof is lowered. It has also been designed to take advantage of the area on a poptop wall with the most strength and fixing support is located.

Full Van & Bus Frameset
Made to suit the longer wall mounting height of vans and motorhomes. The overall length of the frameset collapsed from top fixing screws to the bottom fixing screws is 1700 mm. The top bracket can be reversed if additional roller clearance over an annexe lights needs to be obtained.

Coaster Style Bus Frameset
This frameset has the bottom leg bent to overcome the curved walls on some buses.  Often used in conjunction with ATRV's bus top mounting bracket which allows further offset when needed.

Short Frameset
Made to suit the lower mounting height on some caravans, e.g. Vans with sloping front profiles.
The overall length of the frameset collapsed from top fixing screws to the bottom fixing screws is 1500 mm