The PL series of charge controllers gives you the freedom to operate your solar electric system the way you want to.

Informative: Display shows battery voltage, charge current, ampere hours in and out of battery, load being drawn from the battery and which part of the charge cycle the battery is in.

Easy to maintain: Information is available for the past 30 days - so even if the user doesn't remember what happend, the regulator will.

Well connected: With the optional PLI interface and PLcom software, the user can access the regulator from a computer. Data can be read or settings adjusted. This can be done remotely by using a modem.

Versatile: It may be the only regulator you will ever need to stock. Its capacity to handle 12, 24 and 48V systems and allow complete control of the regulation cycle mean you can use it almost anywhere.

Features:

    * LCD display shows - battery voltage, charge current, load current, charging amp hours in, amp hours out, daily minimum, maximum battery voltage, and time battery finished charging.
    * One regulator can be used on 12Volt, 24Volt or 48Volt DC systems
    * Short circuit and reverse battery polarity protected
    * 4 preset programmes, or manual user configuration
    * Can be used with sealed lead acid batteries
    * Includes timer function for turning loads on and off, and a daylight switch
    * Adjustable load disconnect voltage

Other advanced features and optional components:

    * Plug in shunts allow PL to incorporate an inverter or backup generator in its calculations
    * Generator control
    * Second battery control
    * An alarm triggered by low battery voltage
    * Extra controls for larger systems, via an expansion board
    * Interface for remote control via computer and modem
    * Shunt regulation and pulse width modulation options
    * Battery temperature sensor